PART 1 | PART 2 | PART 3 | PART 4 | PART 5 | PART 6 | PART 7 | PART 8 |
PART 6: Attachment Hole & Ring
The Hole
The Ring
PART 8: The Blade
Make a cube and scale it to the size of the handle. Select the blade and freeze transformations. Modify > Freeze Transformations.
The blade is approximately 3 times the size of the handle, so we basically we just change Scale Y to 3 and then move the blade in place.
Insert edge loops at the top and bottom to control the roundness at the ends. I used 2 loop for the base and 1 for the top.
Now the model is done!!! We still have to render it.